The selection of air compressor is very important to the air compressor equipment and users themselves, which is too wasteful and expensive; Too small selection may cause the air compressor to be in the loading state for a long time, insufficient air consumption or pressure failure. Therefore, the selection of air compressor needs to be correct…

Fault phenomenon: the exhaust temperature of the unit is high (more than 100° C), the coolant level of the unit is too low (it should be seen from the oil scope, but not more than half); Dirty oil cooler; The oil filter core is blocked; Temperature control valve failure (component failure); break…

Structural principle of closed compressor: a closed compressor, which is composed of a motor part, a mechanical part driven by the motor part, and a sealing container containing the motor part and the mechanical part. The mechanical part includes a cylinder, a piston reciprocating in the cylinder, and a cylinder end…

Air compressor is one of the necessary power equipment for many enterprises, and screw air compressor is the mainstream product in the air compressor market today. For the air compressor, the main function is to produce gas, so that air compression with pressure. Working principle of screw air compressor…

The oil-gas separator is a device that separates the crude oil produced from the associated natural gas. The oil-gas separator is placed between the submersible centrifugal pump and the protector to separate the free gas in the well fluid from the well fluid, the liquid is sent to the submersible centrifugal pump, and the gas is released to the tubing and…

1、 After the dust is filtered by the air filter, the air in the air flow enters the machine head through the air inlet valve and is compressed and mixed with the lubricating oil. The compressed air mixed with oil is discharged to the oil gas separation drum, and then enters the air after passing through the oil gas separator, pressure maintaining valve and aftercooler…